fastports

libXtst 1.2.5

x11/libXtst

X Test extension

Category
x11
Maintainer
x11@FreeBSD.org
WWW
https://gitlab.freedesktop.org/xorg/lib/libxtst
License
MIT
USES
cpe tar:xz xorg xorg-cat:lib xorg

Description

libXtst provides the Xlib-based client API for the XTEST & RECORD
extensions.

The XTEST extension is a minimal set of client and server extensions
required to completely test the X11 server with no user intervention.
This extension is not intended to support general journaling and
playback of user actions.

The RECORD extension supports the recording and reporting of all
core X protocol and arbitrary X extension protocol.

Dependencies

Commit History

may be incomplete — full history at freebsd-ports on GitHub

Commit Credits Log message
1.2.5
5ac4ec8313 files touched
mew14930xvi (mew14930xvi)
x11/libXtst: Update to 1.2.5 and Fix manpages and pkg-descr
PR:	286596
1.2.4
2a486d07dd files touched
Жунёва Мария Михайловна (zhunyova)
x11/libXtst: update to 1.2.4
Remove GNU_CONFIGURE_MANPREFIX

Changes: https://gitlab.freedesktop.org/xorg/lib/libxtst/-/compare/libXtst-1.2.3...libXtst-1.2.4
Reviewed by:	diizzy, jbeich
Tested by:	arrowd
Pull Request:	https://github.com/freebsd/freebsd-ports/pull/273
Sponsored by:   Serenity Cybersecurity, LLC
1.2.3
831dc5b011 files touched
Muhammad Moinur Rahman (bofh)
x11/libXtst: Moved man to share/man
Approved by:    portmgr (blanket)
1.2.3
fb16dfecae files touched
Stefan Eßer (se)
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)
1.2.3
b7f05445c0 files touched
Stefan Eßer (se)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)
1.2.3
d357bca4f0 files touched
Tobias C. Berner (tcberner)
x11: remove 'Created by' lines
A big Thank You to the original contributors of these ports:

  *  Adam Weinberger <adam@vectors.cx>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alexander Matey <matey@cis.ohio-state.edu>
  *  Alexander Nedotsukov <bland@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@regency.nsu.ru>
  *  Alexey Mikhailov <karma@ez.pereslavl.ru>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Anton Toernqvist <antont@inbox.lv>
  *  Anton Tornqvist <antont@inbox.lv>
  *  Ashish Shukla <wahjava@gmail.com>
  *  Ben Woods <woodsb02@FreeBSD.org>
  *  Bert Burgemeister <trebbu@googlemail.com>
  *  Bruce A. Mah <bmah@ca.sandia.gov>
  *  Bruce M Simpson <bms@FreeBSD.org>
  *  Chris Hutchinson <portmaster@BSDforge.com>
  *  Cy SChubert <cy@FreeBSD.org>
  *  Cy Schubert <Cy.Schubert@uumail.gov.bc.ca>
  *  Cy Schubert <cy@FreeBSD.org>
  *  DaJoob
  *  Daniel Roethlisberger <daniel@roe.ch>
  *  Daniel Walter <sahne@0x90.at>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  Dave Grochowski
  *  David Mackay <davidjx8p@gmail.com>
  *  David Yeske <dyeske@gmail.com>
  *  Dejan Lesjak <lesi@FreeBSD.org>
  *  Denis Shaposhnikov <dsh@vlink.ru>
  *  Dennis Herrmann <dhn@FreeBSD.org>
  *  Dmitri Goutnik <dg@syrec.org>
  *  Dominik Rothert <dr@domix.de>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@critical.ch>
  *  Eric Anholt <anholt@FreeBSD.org>
  *  Eric Blood <eblood@cs.unr.edu>
  *  Eric L. Hernes <erich@rrnet.com>
  *  Eric Turgeon <ericbsd@FreeBSD.org>
  *  Eric Turgeon <ericturgeon.bsd@gmail.com>
  *  Evgeni Dimitrov <evgeni.dimitrov@gmail.com>
  *  FURUSAWA,Kazuhisa <kazu@jp.freebsd.org>
  *  Florent Thoumie <flz@xbsd.org>
  *  Foxfair Hu <foxfair@FreeBSD.org>
  *  Francis Bacque <idroxid01@yahoo.fr>
  *  Franz Klammer <klammer@webonaut.com>
  *  Gerrit Beine <tux@pinguru.net>
  *  Grzegorz Blach <gblach@FreeBSD.org>
  *  Gustau Perez i Querol <gustau.perez@gmail.com>
  *  Gvozdikov Veniamin <g.veniamin@googlemail.com>
  *  Hendrik Scholz <hendrik@scholz.net>
  *  Jacob House <jacob@jwfh.ca>
  *  James Earl <jdearl@telus.net>
  *  Jean-Baptiste Quenot <jb.quenot@caraldi.com>
  *  Jeroen Schot <schot@a-eskwadraat.nl>
  *  Jim Mock <jim@FreeBSD.org>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Julien Laffaye <kimelto@gmail.com>
  *  KIMURA Yasuhiro <yasu@utahime.org>
  *  Ka Ho Ng <khng300@gmail.com>
  *  Kelly Yancey <kbyanc@posi.net>
  *  Ken Moore <ken@pcbsd.org>
  *  Koop Mast <einekoai@chello.nl>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Kris Kennaway <kris@FreeBSD.org>
  *  Kris Moore <kmoore@FreeBSD.org>
  *  Lars Engels <lars.engels@0x20.net>
  *  Lin, Cheng-Tao <b89605222@ntu.edu.tw>
  *  MANTANI Nobutaka <nobutaka@nobutaka.com>
  *  Markus Brueffer <markus@FreeBSD.org>
  *  Martin Ranne <gasp@ridcully.dnsalias.org>
  *  Martin Tournoij <carpetsmoker@xs4all.nl>
  *  Martin Wilke (miwi@FreeBSD.org)
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Matt Lancereau
  *  Matt Lancereau <matt@rimasec.net>
  *  Matt Peterson <matt@peterson.org>
  *  Matthew Donovan <kitchetech@gmail.com>
  *  Matthew Fuller <fullermd@futuresouth.com>
  *  Matthew Hunt <mph@pobox.com>
  *  Matthew West <mwest@uct.ac.za>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michiel Overtoom <motoom@xs4all.nl>
  *  Mikhail Teterin <mi@aldan.algebra.com>
  *  Morten Slot Kristensen
  *  Murray Stokely <murray@FreeBSD.org>
  *  NAKATA, Maho <maho@FreeBSD.org>
  *  Nicola Vitale <nivit@FreeBSD.org>
  *  Nikos Ntarmos <ntarmos@ceid.upatras.gr>
  *  Nikos Ntarmos <ntarmos@cs.uoi.gr>
  *  Oleg Pudeyev <oleg@bsdpower.com>
  *  Oliver Breuninger <ob@breuninger.org>
  *  Oliver Breuninger <ob@seicom.NET>
  *  Oliver Lehmann <oliver@FreeBSD.org>
  *  Olivier Cochard-Labbe <olivier@FreeBSD.org>
  *  Olivier Duchateau
  *  Patrick Li <pat@databits.net>
  *  Pawel Worach <pawel.worach@gmail.com>
  *  Pedro Giffuni
  *  Per Otterstr=F6m <pelle@fukt.bth.se>
  *  Petr Holub <hopet@ics.muni.cz>
  *  Pietro Cerutti <gahr@FreeBSD.org>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Roman Bogorodskiy <novel@FreeBSD.org>
  *  Sakai Hiroaki <sakai@miya.ee.kagu.sut.ac.jp>
  *  Sakai Hiroaki <sakai@seki.ee.kagu.sut.ac.jp>
  *  Samy Al Bahra <samy@kerneled.org>
  *  Samy Al Bahra <sbahra@kerneled.org>
  *  Sascha Holzleiter <sascha@root-login.org>
  *  Satoshi Asami <asami@FreeBSD.org>
  *  Satoshi TAOKA
  *  Scott Mace <smace@FreeBSD.org>
  *  Sean Farley <sean-freebsd@farley.org>
  *  Sebastian Yepes <esn@x123.info>
  *  Serge Gagnon <gagnon__s@videotron.ca>
  *  Sergei Kolobov <sergei@kolobov.com>
  *  Sofian Brabez <sbz@FreeBSD.org>
  *  Stanislav Sedov <stas@FreeBSD.org>
  *  Stepan Zastupov [RedChrom] <redchrom@gmail.com>
  *  Stephen Montgomery-Smith <stephen@math.missouri.edu>
  *  Stijn Hoop <stijn@win.tue.nl>
  *  Tatsumi Hosokawa
  *  Theron Tarigo <theron.tarigo@gmail.com>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Thomas Hurst <tom@hur.st>
  *  Tim Bishop <tim@bishnet.net>
  *  Timothy Beyer <beyert@cs.ucr.edu>
  *  Tobias Roth <ports@fsck.ch>
  *  UMENO Takashi <umeno@rr.iij4u.or.jp>
  *  Vincent Tantardini <vinc@freebsd-fr.org>
  *  Volker Stolz <stolz@i2.informatik.rwth-aachen.de>
  *  Winston Weinert <winstonw@lavabit.com>
  *  Ying-Chieh Liao <ijliao@csie.nctu.edu.tw>
  *  Yinghong Liu <relaxbsd@gmail.com>
  *  Yoshiro MIHIRA <sanpei@sanpei.org>
  *  Yukihiro Nakai <Nakai@Mlab.t.u-tokyo.ac.jp>
  *  Zane C. Bowers
  *  Zhihao Yuan <lichray@gmail.com>
  *  asami
  *  chinsan
  *  dirk.meyer@dinoex.sub.org
  *  dom@myrddin.demon.co.uk
  *  eimar.koort
  *  gpalmer
  *  gpalmer@FreeBSD.org
  *  grog
  *  gurkan@phys.ethz.ch
  *  hemi@puresimplicity.net
  *  ijliao
  *  incabulos@mac.com
  *  jacs
  *  janek
  *  jhb
  *  jkh
  *  jkh@FreeBSD.org
  *  jmz
  *  joerg
  *  johalun0@gmail.com
  *  jonny
  *  jsellens
  *  krion
  *  matt@bdd.net
  *  michael johnson <ahze@ahze.net>
  *  nkazushi@highway.or.jp
  *  od <od@iclub.nsu.ru>
  *  oleg@bsdpower.com
  *  roam@FreeBSD.org
  *  trevor
  *  will

With hat:	portmgr
1.2.3
305f148f48 files touched
Mathieu Arnold (mat)
Remove # $FreeBSD$ from Makefiles.
1.2.3
c32f72e68d files touched
Niclas Zeising (zeising)
Switch all ports to use USES=xorg-cat
Change all ports to use USES=xorg-cat instead of the old XORG_CAT
Add USES=xorg and USES=gl as needed to x11@ ports
1.2.3
0fae2e9e0e files touched
Niclas Zeising (zeising)
Change x11/xorgproto to become a build dep
Change x11/xorgproto to become a build time dependency when added to
USE_XORG.  Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.

PR:		230909
Reviewed by:	eadler
Approved by:	portmgr (antoine)
Obtained from:	https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run:	antoine
Differential Revision:	https://reviews.freebsd.org/D16906
1.2.3
15dac70c75 files touched
Niclas Zeising (zeising)
Switch to xorgproto instead of individual packages
Upstream used to distribute protocol headers as separate packages, but has
decided to merge those to a common package, named xorgproto.  This update
tracks that change.

* Add a new port, x11/xorgproto, with are protocol headers for xorg.
* Hook the new protocol port to the build and to infrastructure in
  bsd.xorg.mk.
* Update all ports with a dependency on any of the old *proto packages to
  instead depend on xorgproto.  Bump portrevision.
* Delete the old *proto packages, update MOVED.

PR:		230023
Submitted by:	zeising
Approved by:	portmgr (antoine)
exp-run by:	antoine
1.2.3
34f6be4150 files touched
Koop Mast (kwm)
Update libX11 to 1.6.4. Update libXfixes to 5.0.2. Update libXi to 1.7.7. Update libXrandr to 1.5.1. Update libXrender to 0.9.10. Update libXtst to 1.2.3. Update libXv to 1.0.11. Update libXvMC to 1.0.10.
Fix a number of issues in the way these X client libraries handle the
responses they receive from servers.

Submitted by:	zeising@
Security:	1cf65085-a760-41d2-9251-943e1af62eb8
MFH:		2016Q4
1.2.2
1fc509c591 files touched
Koop Mast (kwm)
Misc X.org port updates:
Update gccmakedep to 1.0.3.
Update imake to 1.0.7.
Update libpciaccess to 0.13.3.
Update libdrm to 2.4.60.
Update bitmap to 1.0.8.
Update fstobdf to 1.0.6.
Update iceauth to 1.0.7.
Update libXdmcp to 1.1.2.
Update libXp to 1.0.3.
Update libXvMC to 1.0.9.
Update libXxf86vm to 1.1.4.
Update libxshmfence to 1.2.
Update randrproto to 1.4.1.
Update rgb to 1.0.6.
Update sessreg to 1.1.0.
Update xcb-util-cursor to 0.1.2.
Update xedit to 1.2.2.
Update xkbcomp to 1.3.0.
Update xkeyboard-config to 2.14.
Update xproto to 7.0.27.
Update xf86-input-mouse to 1.9.1.
Update xf86-input-synaptics to 1.8.2.
Update xf86-video-i710 to 1.3.5.
Update xf86-video-mga to 1.6.4.
Update xf86-video-tdfx to 1.4.6.
Update xf86-video-vmware to 13.1.0.
Update bdftopcf to 1.0.5.
Update font-util to 1.3.1.
Update fslsfonts to 1.0.5.
Update mkfontscale to 1.1.2.
Update showfont to 1.0.5.
Update xfs to 1.1.4.
Update xfsinfo to 1.0.5.

Remove :keepla from USES=libtool for X libraries in bsd.xorg.mk, and bump
  all affected ports.

PR:		199400
Obtained from:	Xorg-devel repo
1.2.2
921d25f2ca files touched
Bartek Rutkowski (robak)
x11/libXtst: add CPE information
PR:		197965
Submitted by:	Shun <shun.fbsd.pr@dropcut.net>
Approved by:	kwm (blank)
1.2.2
625124ef9f files touched
Baptiste Daroussin (bapt)
Cleanup plist
1.2.2
aad09bc5e2 files touched
Tijl Coosemans (tijl)
When linking a library libA with a library libB using libtool, if libB.la exists, libtool will add all libraries libB.la refers to (dependency_libs field) to the linker command line and store them in the dependency_libs field of libA.la. So everything that subsequently links with libA will also link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries.  Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field.  In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.

PR:		ports/188759
Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)
1.2.2
39fc32e828 files touched
Niclas Zeising (zeising)
The FreeBSD x11@ and graphics team proudly presents a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.

Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.

Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.

Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.

Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics

Thanks to:	all testers, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/187602 [1]
Approved by:	portmgr (bdrewery), core (jhb)
1.2.2
47be7a61c9 files touched
Niclas Zeising (zeising)
Switch FreeBSD CURRENT to use the new xorg stack (WITH_NEW_XORG=) [0] If the old xorg stack is still needed, it is possible to add WITHOUT_NEW_XORG= to /etc/make.conf to get the old version.
Update several xorg related ports, including:
x11/libxcb 1.9.1 -> 1.9.3
graphics/libdrm 2.4.46 -> 2.4.50
x11/pixman 0.30.2 -> 0.32.4
x11/xkeyboard-config 2.9 -> 2.10.1
x11-drivers/xf86-input-keyboard 1.7.0 -> 1.8.0

Fix dissapearing cursor in xf86-video-vmware [2]

Stagify all x11@-owned ports

Bump portrevisions for xf86-* ports due to xserver version change.

Fix fallout from updates where needed.

Thanks to:	all testersi, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/184684 [1], ports/181385 [2]
Submitted by:	Douglas Carmichael <dcarmich@dcarmichael.net> [2]
Approved by:	portmgr (bdrewery), core (jhb) [0]
1.2.2
db5320be85 files touched
Baptiste Daroussin (bapt)
Add NO_STAGE all over the place in preparation for the staging support (cat: x11)
1.2.2
d516c8b663 files touched
Niclas Zeising (zeising)
Fix security issues in xorg client libraries. Most libraries were updated to newer versions, in some cases patches were backported instead.
Most notably, x11/libX11 was updated to 1.6.0

Security:	CVE-2013-1981
		CVE-2013-1982
		CVE-2013-1983
		CVE-2013-1984
		CVE-2013-1985
		CVE-2013-1986
		CVE-2013-1987
		CVE-2013-1988
		CVE-2013-1989
		CVE-2013-1990
		CVE-2013-1991
		CVE-2013-1992
		CVE-2013-1993
		CVE-2013-1994
		CVE-2013-1995
		CVE-2013-1996
		CVE-2013-1997
		CVE-2013-1998
		CVE-2013-1999
		CVE-2013-2000
		CVE-2013-2001
		CVE-2013-2002
		CVE-2013-2003
		CVE-2013-2004
		CVE-2013-2005
		CVE-2013-2062
		CVE-2013-2063
		CVE-2013-2064
		CVE-2013-2066
1.2.1
92ea0d614b files touched
Niclas Zeising (zeising)
The FreeBSD x11 team proudly presents an zeising, kwm, miwi, bapt, eadler production:
Xorg 7.7

Starring:
xserver 1.12.4 (new xorg only)
Mesa 8.0.4, including libGL, libGLU and dri (new xorg only)
libX11 1.5.0
libxcb 1.9
libdrm 2.4.42 (new xorg only)
freeglut 2.8.1
Also starring:
Updates to drivers and other libraries and utilities

Additional notes:
Change pkgconf to be a build dependency.
Add a new USE_XORG, xcb, to depend on libxcb and update all ports to use
this.
Trim makefile headers.
Take maintanership of x11/xcb-proto, ok'd by ashish.
If you are running WITH_NEW_XORG=, you need to rebuild all installed
drivers, see UPDATING for more information.
Various fixes to make ports compile.

PR:		ports/177942
Exp-run by:	miwi
Approved by:	portmgr (miwi)

Thanks to all who helped testing!
1.2.0
05a4bd4ab2 files touched
Eitan Adler (eadler)
- updated evieext to 1.1.1 - updated libSM to 1.2.0,1 - updated libX11 to 1.4.4,1 - updated libXevie to 1.0.3 - updated libXext to 1.3.0_1,1 - updated libXfixes to 4.0.4 - updated libXi to 1.4.3,1 - updated libXinerama to 1.1.1,1 - updated libXp to 1.0.1,1 - updated libXpm to 3.5.9 - updated libXrandr to 1.3.2 - updated libXrender to 0.9.6 - updated libXres to 1.0.5 - updated libXtst to 1.2.0 - updated libXv to 1.0.6,1 - updated libXxf86dga to 1.1.2 - updated libXxf86misc to 1.0.3 - updated libXxf86vm to 1.1.1 - updated xdbedizzy to 1.1.0 - updated xdm to 1.1.10 - updated xf86dga to 1.0.3 - updated xf86driproto to 2.1.1 - updated xfd to 1.1.0 - updated xfindproxy to 1.0.2 - updated xfwp to 1.0.2 - updated xinit to 1.3.1 - updated xkbcomp to 1.2.3 - updated xkeyboard to config-2.1 - updated xlsatoms to 1.1.0 - updated xmag to 1.0.4 - updated xman to 1.1.2 - updated xorg to cf-files-1.0.4 - updated xrefresh to 1.0.4 - updated xrx to 1.0.4 - updated xsm to 1.0.2 - updated xwud to 1.0.3 - fix final line in pkg-descr - add license where appropriate - remove two patches in libX11 which are no longer required
Reviewed by:	kwm
Approved by:	bapt (mentor)
Obtained from:	xorg-devel repo
1.1.0
a9481afc8a files touched
Martin Wilke (miwi)
- Get Rid MD5 support
1.1.0
d594ccc94f files touched
Martin Wilke (miwi)
- Please welcome Xorg 7.5.1
The X-Server has been patched to the latest 1.7.X series, drivers
and fonts have been updated to the latest versions. This update includes
some components from Xorg 7.6 with a lot of improvements, and it seems
that the performance is much better than the old version. Also this
Update fix build issues with clang and binutils 2.17.50 in current,
remove 6.X gruft and de-author pkg-descr.

I would like to thank:

	Beat Gaetzi
	Dima Panov
	Koop Mast
	Eitan Adler
	and all Testers.

PR:		ports/147646
		ports/148035
		ports/148744
		ports/150223
		ports/152889
		ports/154457
1.1.0
4a8684e352 files touched
Ade Lovett (ade)
Sync to new bsd.autotools.mk
1.1.0
f4936121f9 files touched
Martin Wilke (miwi)
- Update to Xorg 7.5
The Intel drivers was patched to work with
the new server. The drivers for Vesa, NV,NVIDIA and
ATI have been tested thoroughfully and seem to work fine.
A complete changelog of Xorg 7.5 can you read here:

http://www.x.org/releases/X11R7.5/

A note to FreeBSD 6.X users: We strongly recommend you
to update your system to 7.x or above.

For updating try

portupgrade -af \*

or:

portmaster -af

Please report any problems and issus to x11 (at) FreeBSD.org.

Thanks to beat@, rnoland@, fluffy@, stas@ and all testers for their help
and Feeback.

Tested by:	Community and 2x exp-runs
1.0.3
789d75c728 files touched
Jeremy Messenger (mezz)
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22. -Update libtool and libltdl to 2.2.6a. -Remove devel/libtool15 and devel/libltdl15. -Fix ports build with libtool22/libltdl22. -Bump ports that depend on libltdl22 due to shared library version change. -Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:	marcus and kwm
Pointyhat-exp:	a few times by pav
Tested by:	pgollucci, "Romain Tartière" <romain@blogreen.org>, and
		a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:	marcus
Approved by:	portmgr
1.0.3
741aa71483 files touched
Rong-En Fan (rafan)
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script. Specifically, newer autoconf (> 2.13) has different semantic of the configure target. In short, one should use --build=CONFIGURE_TARGET instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:		126524 (obsoletes 52917)
Submitted by:	rafan
Tested on:	two pointyhat 7-amd64 exp runs (by pav)
Approved by:	portmgr (pav)
1.0.3
de3e5fac41 files touched
Florent Thoumie (flz)
Add inputproto to RUN_DEPENDS as well.
1.0.3
62df320cc3 files touched
Florent Thoumie (flz)
- Update X.org ports to 7.3. - Mark XFree86-4 as DEPRECATED with EXPIRATION_DATE set to 2007-12-25. I hope that nobody will be bored enough on Christmas to remove them on that day.
Tested by:	vehemens, Rene Ladan, Beech Rintoul, sarek on x11@
1.0.2
eacee25b50 files touched
Dejan Lesjak (lesi)
Update to 1.0.2.
PR:		ports/113587
Submitted by:	chinsan
1.0.1
d4f0d0048a files touched
Florent Thoumie (flz)
- Welcome X.org 7.2 \o/. - Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}. - Bump PORTREVISION for ports intalling files in ${X11BASE}.